RDM-T9FZ - RF Transceiver Module in 915 MHz

RDM-T9FZ

RF Transceiver Module (915 MHz)

The RDM-T9FZ is a low-cost sub 1 GHz integrated transceiver module designed for very low power wireless applications. The circuit of these integrated RF module is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band 915 MHz, but can easily be programmed for operation at other frequencies in the 779-928 MHz band. The RF integrated transceiver module is integrated with a highly configurable baseband modem. The modem in these serial interface transceiver supports various modulation formats and has a configurable data rate up to 500 kbps. RDM-T9FZ as an integrated RF module provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters and the 64-byte transmit/receive FIFOs of RDM-T9FZ can be controlled via an SPI interface. A 4-wire SPI serial interface is used for configuration and data buffer access.

Frequency of operation

• 915 MHz

Interface

• Single board transceiver with SPI Interface

Receiver Sensitivity

• High receiver sensitivity of -112 dBm

Supply Voltage

• 1.8 V to 3.6 V

Power Consumption

• n Receive mode: 14 mA
• In Transmit mode: 15 mA
• In Sleep mode: 400 nA

RF Output Power

• Programmable output power from -30 dBm to +10 dBm

Data Rate

• Programmable data rate from 1.2 kbps to 500 kbps

Modulation

• 2 FSK, GFSK, MSK supported as well as OOK and flexible ASK shaping

Other features

• Integrated analog temperature sensor
• Digital RSSI output
• Programmable carrier sense (CS) indicator
• Optional automatic whitening and de-whitening of data
• Wake-on radio functionality for automatic low-power RX polling
• Separate 64-byte TX and RX data FIFOs (enables burst mode data transmission)

SMA Whip Antenna

• Dimensions: 4.1 x 3.2 x 0.5 (L x W x H) in cms
• Weight: 5 gms
• Operating Temperature: -40° to +85° C

• FCC: Yes
• IC: Yes
• Europe/ETSI: Yes
• RoHS: Yes

• Low cost wireless data transfer
• Wireless medical applications
• Remote control / security systems
• Wireless sensor networks
• Keyless entry
• Home automation
• Process and building control
• Automotive systems
• Active RFID solutions
• AMR – Automated Meter Reading